HP EliteBook 2540P Maintenance And Service Manual page 10

Category
Internal storage
Optical drives
2 Chapter 1 Product description
Description
Supports the following configurations:
●
8192-MB total system memory (4096 × 2)
●
6144-MB total system memory (4096 + 2048)
●
4096-MB total system memory (4096 × 1, 2048 × 2)
●
3072-MB total system memory (2048 + 1024)
●
2048-MB total system memory (2048 × 1, 1024 × 2)
●
1024-MB total system memory (1024 × 1)
Computer models equipped with a standard-voltage (35-W) processor support the following 2.5-in
storage devices:
●
500-GB hard drive (7200-rpm, SMART SATA II)
●
320-GB hard drive (7200-rpm, SMART SATA II)
●
320 self-encrypting drive (SED) GB hard drive (7200-rpm, SMART SATA II)
●
250-GB hard drive (7200-rpm, SMART SATA II)
–or–
●
160-GB solid-state drive
●
80-GB solid-state drive
NOTE: The 1.8-in hard drive bay is not supported on computer models equipped with a standard-
voltage (35-W) processor.
Computer models equipped with a low-voltage (25-W) processor support the following storage
devices:
●
In the 1.8–in hard drive bay:
◦
320-GB hard drive (5400-rpm, SMART SATA II)
◦
250-GB hard drive (5400-rpm, SMART SATA II)
◦
160-GB hard drive (5400-rpm, SMART SATA II)
–or–
◦
160-GB solid-state drive
◦
80-GB solid-state drive
●
In the 2.5-in hard drive carrier (for RAID support): 2.5-in, 250-GB, 7200-rpm SMART SATA II
hard drive (requires the installation of a 1.8-in, 250-GB, 5400-rpm hard drive in the 1.8-in hard
drive bay)
NOTE: Internal storage devices are customer-removable and will withstand multiple insertion and
removal cycles. Up to 15 GB is reserved for the system recovery software.
NOTE: The optical drive is an optional feature and is available only on computer models equipped
with a low voltage (25-W) processor.
Fixed (removal of 1 screw required)
Customer-accessible
Serial ATA
ENWW