Modem Module - HP EliteBook 2540P Maintenance And Service Manual

Modem module

NOTE: The modem module spare part kit does not include a modem module cable. The modem
module cable is included in the Cable Kit, spare part number 598766-001.
Description
For use in all countries and regions except Australia and New Zealand
For use only in Australia and New Zealand
Before removing the modem module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Memory module compartment cover (see
b. Wireless module compartment cover (see
c. Switch cover and keyboard (see
d. Display assembly (see
e. Top cover (see
f. System board (see
Remove the modem module:
1. Remove the two Phillips PM2.0×4.0 screws (1) that secure the modem module to the system
board.
2. Lift the modem module (2) straight up to disconnect it from the system board.
ENWW
Battery on page 48), and then remove the following components:
Switch cover and keyboard on page
Display assembly on page
Top cover on page 85)
System board on page
Expansion memory module on page
WLAN module on page
76)
94)
Component replacement procedures
Spare part number
510099-001
510099-011
52)
57)
69)
97