HP EliteBook 2540P Maintenance And Service Manual page 91

e. Disconnect the display panel cable (3) from the passthrough board.
f. Remove the display panel.
g. Remove the two Phillips PM2.0×4.0 screws (1) that secure each display hinge to the
display panel.
h. Remove the display hinges (2). The display hinges are included in the Display Hinge Kit,
spare part number 598773-001.
i. Remove the Torx T8M2.0×4.0 screws (3) that secure the hinge covers to the hinges.
j. Remove the hinge covers (4). The hinge covers are included in the Plastics Kit, spare part
number 598796-001.
k. Disconnect the webcam module cable (1) from the passthrough board.
l. Release the webcam module (2) from the clip built into the display enclosure. The webcam
module is available using spare part number 598772-001.
ENWW Component replacement procedures 83