Table of Contents
Advertisement
Interface
WAN
Connecting the other broadband CPE or Gateway Router
For connecting the 3G network adapter or other USB storage
USB 1~2
devices.
Power
Power interface, for connecting the power adapter.
On/Off
Power switch.
Key reuse, Press the button for less than 5 second and then release
it, enable or disable the 802.11ac function; press the button for more
5G
than 5 second and then release it, enable WPS PBC mode., if WPS
is enabled, the wireless router starts to accept the negotiation of
PBC mode.
Key reuse, Press the button for less than 5 second and then release
it, enable or disable the 802.11n function; press the button for more
2.4G
than 5 second and then release it, enable WPS PBC mode., if WPS
is enabled, the wireless router starts to accept the negotiation of
PBC mode.
Fiber
Fiber port: for connecting the device to a G.Fast optical module
Warning:
Do not press the Reset button unless you want to clear the current settings. The
Reset button is in a small circular hole on the rear panel. If you want to restore the
default settings, please press the Reset button gently for 1 second with a fine needle
inserted into the hole and then release the button. The system reboots and returns to
the factory defaults.
3.2 Hardware Installation
Choosing the Best Location for Wireless
3.2.1
Operation
Many environmental factors may affect the effective wireless function of the DSL
Router. If this is the first time that you set up a wireless network device, read the
following information:
Copyright @ 2016 OvisLink (Canada) INC All rights reserved
OV915WVA User Manual
Description
8
Advertisement
Table of Contents
