Table of Contents
Advertisement
Multicomp-Pro
How to Implement the Probe Compensation
When connect the probe with any input channel for the first time, make this
adjustment to match the probe with the input channel. The probe which is not
compensated or presents a compensation deviation will result in the measuring error
or mistake. For adjusting the probe compensation, please carry out the following
steps:
1. Set the attenuation coefficient of the probe on the menu as 10X and that of the
switch in the probe as 10X (see "
10
Advertisement
Table of Contents
Need help?
Do you have a question about the MP720644 and is the answer not in the manual?