Initiating Or Resuming From Standby - HP Compaq Presario,Presario X6000 Hardware And Software Manual

Power

Initiating or Resuming from Standby

Task
Initiate Standby
Allow the system
to initiate
Standby
Resume from
user-initiated or
system-initiated
Standby
3–10
Procedure
With the notebook on, use
either of the following
procedures:
■ Press the fn+f5 hotkey.
■ Select Start > Turn off
Computer > Stand by.
■ If the notebook is running
on battery power, the
system initiates Standby
after 10 minutes of
notebook inactivity (default
setting).
■ If the notebook is running
on external power, the
system does not initiate
Standby.
■ Change power settings and
timeouts in the Power
Options window.
Perform one of the following
actions:
■ Press the power/standby
button.
■ Press any key on the
keyboard.
■ Touch the TouchPad to
initiate TouchPad activity.
Result
■ The power/standby
light blinks.
■ The screen is cleared.
■ The power/standby
light blinks.
■ The screen is cleared.
■ The power/standby light
is turned on.
■ Your work returns to
the screen.
Hardware and Software Guide