HP Compaq Presario,Presario X6000 Hardware And Software Manual page 37

Initiate Standby (fn+f5)
The
fn+f5
be initiated only while the notebook is on. If the notebook is in
Hibernation, you must restore from Hibernation before you can
initiate Standby.
■
To restore from Hibernation, briefly press the power/standby
button.
■
To resume from Standby, briefly press the power/standby
button, touch the TouchPad to initiate TouchPad activity, or
press any key on the keyboard.
For more information about using Standby and Hibernation, refer
to "About Standby, Hibernation and Shutdown"
For information about changing the function of the
refer to
Initiate QuickLock (fn+f6)
The
fn+f6
security feature.
QuickLock protects your notebook by displaying the operating
system log-on screen. While the log-on screen is displayed, the
notebook cannot be accessed until a Windows user password or
Windows administrator password is entered.
Before you can use the QuickLock feature, you must set a
Windows user password or Windows administrator password. For
instructions, refer to the Help and Support Center by selecting
Start > Help and Support.
■
To initiate QuickLock, press
■
To exit QuickLock, enter your Windows user password or
Windows administrator password.
Hardware and Software Guide
hotkey is set by default to initiate Standby. Standby can
"Managing Power Options"
hotkey initiates the operating system QuickLock
in Chapter
fn+f6.
Keyboard
in Chapter 3.
hotkey,
fn+f5
3.
2–9