Tools Needed - RIDGID R4010TR Operator's Manual

FEATURES
KNOW YOUR TILE SAW
See Figure 3.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
10 in. TILE CUTTING WHEEL - A 10 in. tile cutting wheel
is included with your saw.
WARNING:
Do not use wheels rated less than the speed of
this tool. Failure to heed this warning could result
in personal injury.
BEVEL LOCK KNOB - The bevel lock knob securely locks
the saw head at 0º, 22.5º or 45º bevel angles.
CLEANING NOZZLE - Rinse away sediment and debris mak-
ing clean up quick and easy using the cleaning nozzle.
DIVERTER VALVE - With the diverter valve turned to the
left, water runs through the clear tube and onto the cutting
wheel. Turn the diverter valve to the right and use the clean-
ing nozzle to wash debris from the saw.
ELECTRIC BRAKE - An electric brake has been provided to
quickly stop wheel rotation after the switch is released.
ExACTLINE™ ADJUSTABLE LASER ALIGNMENT
SYSTEM - For more accurate cuts, a laser guide is included
with the tile saw. When used properly, the laser guide makes
accurate, precision cutting simple and easy. Simply push the
button to turn the laser on or off.
GFCI TWIST-LOCK PLUG - This saw can only be turned
ON after the GFCI twist-lock plug has been connected
to the tool's power cord. It is necessary to push the reset
button each time the saw is plugged into a power source.

TOOLS NEEDED

The following tools (not included or drawn to scale) are needed for assembly and alignment:
fraMinG sQuare
LED WORKLIGHT - Your saw comes equipped with an LED
worklight that lights the work area for more accurate cuts.
The worklight turns on when the saw is plugged in.
MICRO-CUT FENCE SUPPORT - This fence support helps
prevent tile from cracking.
MITER GUIDE - The easy-to-read indicator on the miter
guide shows the exact angle for a miter cut with detents at
0°, 22.5°, and 45°.
ON/OFF SWITCH - This saw has an easy access power
switch located on the saw arm. To lock the switch, install a
padlock (not included) through the hole in the switch trigger.
When the lock is installed and locked, the switch is inoper-
able. Store the padlock key in another location.
READY RACK™ TILE SUPPORT- Provides a convenient
location to stack and dry tiles.
SEDIMENT SEPARATION SYSTEM™ - This system
separates sediment and debris filtering the water before it is
recycled into the water tank.
SLIDING TABLE - The sliding table allows the user to slide
the workpiece into the cutting wheel for accurate cuts.
SUBMERSIBLE PUMP - The submersible pump (not shown)
provide water to the cutting wheel or cleaning nozzle.
VARIABLE FLOW VALVE - Adjusts the flow of water to the
cutting wheel.
WATER TANK - Using the universal pump and water tank
together keeps water circulating to the tool eliminating the
need for frequent water changes.
WATER TRAY ExTENSIONS - When cutting larger tile, the
extensions keeps work area cleaner and drier.
WRENCH STORAGE - The tile saw has a convenient stor-
age area specifically designed for wrenches.
WSUV™ WET SAW UTILITY VEHICLE - Attached to the
saw base, the leg stand opens and closes with ease making
transportation simple.
10 — English
adJustable wrench
10 mm wrench
Fig. 4