Language Settings; Useful Settings - Sharp AQUOS LC-40LE924RU Operation Manual

Basic adjustment

Language settings

View setting
Digital audio language
Set up to three preferred multi audio languages to display
if the audio languages are available.
Go to "Menu" > "Setup" > "View setting" >
"Individual setting" > "Digital audio language".
Switching the multi audio languages
E
Each time you press 7 on the remote control unit, the
audio language switches.
View setting
Subtitle
Set up to two preferred subtitle languages (including
subtitles for the hearing impaired) to display if subtitles
are available.
Go to "Menu" > "Setup" > "View setting" >
"Individual setting" > "Subtitle".
Selectable items
E 1st language
E 2nd language
E For hearing impaired
Switching subtitle languages
E
Each time you press [ on the remote control unit, the
subtitle switches.
Off
Set "For hearing impaired" to "Yes"
E
Subtitles for the hearing impaired have priority over each
of the subtitle language settings (e.g., "1st language",
"2nd language", etc.).
EXAMPLE
1st language
(For hearing impaired)
NOTE
• Subtitles will not be displayed when the programme does not
contain subtitle information.
38
1st language
2nd language
1st language
View setting
Language
You can select an OSD language from among 23
languages. Refer to the OSD language column in the
specification table for the selectable languages (Page 65).
Go to "Menu" > "Setup" > "View setting" >
"Language".

Useful settings

View setting
Quick start
You can reduce the TV's start-up time after turning on the
power with the remote control unit.
Go to "Menu" > "Setup" > "View setting" >
"Quick start".
The TV quickly starts up from standby.
On
30 W or more of power consumption is
required during standby.
Power consumption is small during
Off
standby.
Item