Table of Contents
Advertisement
Watching TV
Selecting an external video
source
Once the connection is
made, press b to display
the "INPUT" screen, and
then press b or a/b
to switch over to the
appropriate external source
with ;.
NOTE
• You can also select an
external video source from
"CH list" > "INPUT".
CH list
INPUT
TV
Switchable
Selecting a sound mode
DTV/SAT mode
E
If multi sound modes are received, each time you press
7 the mode switches as follows.
Audio (ENG)
L/R
Audio (ENG)
CH A
Audio (ENG)
Press c/d to select L or R sound when the STEREO or
DUAL MONO screen is displayed.
Audio (ENG)
L/R
L
NOTE
• The sound mode screen disappears in six seconds.
• Selectable items vary depending on the received broadcasts.
• When the "Audio description setting" menu is set to "On", the
audio description sound is selected depending on the main
audio.
ATV mode
E
Each time you press 7, the mode switches as shown
in the following tables.
NICAM TV broadcasts selection
Signal
Selectable items
Stereo
NICAM STEREO, MONO
NICAM CH A, NICAM CH B, NICAM CH AB,
Bilingual
MONO
Monaural
NICAM MONO, MONO
A2 TV broadcasts selection
Signal
Selectable items
Stereo
STEREO, MONO
Bilingual
CH A, CH B, CH AB
Monaural
MONO
NOTE
• When no signal is input, the sound mode will display "MONO".
STEREO
L
R
LR
CH A
CH B
CH AB
MONO
STEREO
R
LR
19
Advertisement
Table of Contents
