Sharp AQUOS LC-40LE924RU Operation Manual page 42

Useful viewing functions
Display information regarding time shift
Channel display
Channel information displays by pressing p on the remote
control unit.
Audio (ENG)
Video
Subtitle
>> New information
n
The time shift ready icon shows up when
READY is pressed and the TV is recording the
programme.
o
The status icon shows up depending on what is
shown on the screen.
The counter displays when you set "On" in "Display the Time
shift memory" (Go to "Setup" > "Option" > "Time shift setting").
Time shift
Memory used:
n
The grey bar shows how much memory is in use.
o
This blue point shows how much time has
progressed.
p
"FULL" shows up when the grey bar reaches
the right edge. The TV starts overwriting the
previously recorded data.
NOTE
• You can also call up the information above by pressing
CONTROL on the remote control unit or select "Control (Time
shift)" from "Option" > "Option for view".
40
STEREO
Off
Counter
Option
Auto input selection
You can choose whether or not to switch the input
source automatically when receiving an AQUOS LINK or
an Euro SCART compatible signal on the TV during time
shift operations.
Go to "Menu" > "Setup" > "Option" > "Time
shift setting" > "Auto input selection".
Release time shift when receiving
an AQUOS LINK or a Euro SCART
Enable
compatible signal. Switch input source
automatically.
Time shift continues to work. The
TV does not switch input source
Disable automatically even when receiving
an AQUOS LINK or a Euro SCART
compatible signal.
Item