Standalone Mode; Overview; Settings In Standalone Mode; Settings Panel Settings - Tascam 0US-4x4TP Reference Manual

8 – Standalone Mode

Overview

This unit will operate in standalone mode if it is turned on when
it is not connected to a computer by USB.
You can use this unit as a mic preamp and to monitor input
signals.
This function is convenient when you want to practice an
instrument without recording, for example.
An external power supply device is necessary. See "Connecting
the power" on page 10 for details.

Settings in standalone mode

When operating in standalone mode, input signals pass-through
the built-in digital mixer and output selector, which are set at
fixed values, and are output from the output jacks. In addition,
when operating in standalone mode, the USB indicator will
blink.

Settings Panel settings

The Settings Panel will be set as follows.
o Direct Monitor Settings Input 1-2 : Mono
o Direct Monitor Settings Input 3-4
(US-4x4 only)
o Audio Input On/Off
o Line Outputs 1-2
o Line Outputs 3-4
(US-4x4 only)
o ERP2 Setting On/Off
20
TASCAM US-2x2/US-4x4
: Mono
: All on
: MONITOR
: MONITOR
: Current setting retained