Battery Packs and Power Management
To Get the Most from Your Battery Packs
Follow these suggestions to make your battery power last as long
as possible:
■
Plug in the AC adapter, especially when using a CD-ROM or
DVD drive, or any external connections such as a PC Card
or a modem.
■
Set the display brightness to the lowest comfortable level
(
Fn+F1
■
Put the notebook in Standby when you will not be using it for
a short while.
■
Put the notebook in Hibernation whenever you want to save
your current session but will not be using the notebook for
a day or more.
■
Set the automatic timeout settings to emphasize saving
power. If your notebook has a multispeed processor, use the
lower speed on battery power (the default settings conserve
battery power).
■
If your notebook has a wireless on-off button, turn off
the wireless function when you are not using it. Press the
wireless on-off button to turn off the light.
■
If you have a PC Card, such as a network card, remove it
when you are not using it. Some PC Cards use significant
power even while they are inactive.
■
If you work with an application that uses the serial port or a
PC Card, exit the application when you finish using it.
In addition, follow these suggestions to extend the life of your
battery packs:
■
Do not leave battery packs unused for long periods. If you
have more than one, rotate them.
■
If you normally use AC power, make a practice of using the
battery pack as your power source at least once a week.
■
Unplug the AC adapter when the notebook is not in use.
3–6
).
Reference Guide