Smeg SAI4954D Translation Of The Original Instructions page 16

• The button corresponding to the zone on
which the pan has been placed turns on
automatically and displays
other zones cannot be activated.
If automatic pan detection is disabled,
when the appliance is switched on, the
symbol appears on the display of all the
cooking zones. To activate the zones, select
them via the relative display and then select
the required power level.
Pan detection indication
Once a zone has been activated /
selected, if the
display, it means the pan is unsuitable.
The symbol also appears if there is no
pan or if the pan is removed.
Use only cookware with a
perfectly flat bottom which is
suitable for induction hot plates.
Using cookware with an irregular
bottom could jeopardise the
efficiency of the heating system
and prevent cookware from being
detected on the hot plate.
Make sure that the pans do not
cover the control panel.
18
. The
symbol appears on the
Use
Adjusting the cooking zone
After having selected/activated a cooking
zone:
1. Place a finger on the left-hand side of the
scroll bar of the cooking zone to be
used.
The power level is now
2. Move your finger to the left or right on the
scroll bar to select the power level, from
to
function (see "Booster Function").
The display of the zone being used will
indicate the selected power level.
Switching off the cooking zone
1. Move your finger all the way to the left
on the scroll bar of the cooking zone you
wish to turn off.
.
or activate the Booster