Table of Contents
Advertisement
Updating the Transmitter
1.
Download the firmware to the receiver.
2.
Access the following menu from the receiver: Device Configuration > Tx Firmware Update.
3.
Align the IR ports between the transmitter and the receiver. IR ports must be aligned for the entire download, which can
take 50 seconds or longer.
The red alignment LED will turn on when the alignment is correct.
4.
Press ENTER on the receiver to begin the download to the transmitter. The receiver will display the progress of the up
date as a percentage.
Specifications
Mic Offset Range
-12 to 21 dB (In 1 dB steps)
Battery Type
Shure SB920 Rechargeable Li-Ion
Battery Runtime
@ 10 mW
Shure SB920
See Battery Runtime Chart
Dimensions
254 mm x 51 mm (10.0 in. x 2.0 in.) L x Dia.
Weight
338 g (11.9 oz.), Without Battery
up to 9 hours
Shure Incorporated
18/24
Advertisement
Table of Contents
