Table of Contents
Advertisement
Setting the Frequency Manually
The transmitter can be manually tuned to a specific group, channel, or frequency.
1.
Navigate to the Radio menu and select Freq.
2.
Scroll to select G: and C: to edit the group and channel, or select the frequency parameter (MHz). When editing the fre
quency, press O once to edit the first 3 digits, or twice to edit the last 3 digits.
Use the ∧∨ buttons to adjust the group, channel, or frequency.
3.
4.
Press O to save, and then press X when finished.
RF Mute
RF Mute prevents transmission of the audio by suppressing the RF signal, while allowing the transmitter to remain powered-on.
The home screen displays RF MUTED in this mode.
1.
From the Radio menu, navigate to Output.
2.
Choose one of the following options:
◦
On: RF signal is active
◦
Mute: RF signal is disabled
3.
Press O to save.
Turning the transmitter off and on, or replacing the battery will restore Output to On.
Safe Start
Power on in Safe Start mode to prevent interference with other devices. Hold the X button while powering on your device until
the Safe Start menu appears.
Shure Incorporated
14/24
Advertisement
Table of Contents
