Hard Drive
Note: Illustrations may show parts removed that are not part of this procedure. It is
necessary to remove only the parts listed in the written procedure.
To remove the hard drive, complete the following steps:
1. Prepare the Notebook for disassembly
2. Remove the Palmrest cover with TouchPad
3. Disconnect the
Note: Do not pull on the ribbon cable. Remove the cable from the back of the hard drive
using the plastic connector attached to the cable.
Continued on the next page.
P
N
M
RESARIO
OTEBOOK
AINTENANCE AND
Presario 1800/1800T Series
Models: XL280, XL380, XL381,
and XL390
hard drive data
cable.
S
G
1800 S
ERVICE
UIDE
(pg
10).
(pg
13).
ERIES
R
& R
25
EMOVAL
EPLACEMENT