b. With standard screwdriver, turn screw counter-clockwise toward "0" and lift
processor from the chassis.
To replace the processor, complete the following:
1. Fully align the processor connector with the system board connector.
2. Press down carefully on the processor directly over the connectors to seat the
processor.
3. Reassemble the remaining subassemblies by reversing their removal procedures.
P
N
M
RESARIO
OTEBOOK
AINTENANCE AND
Presario 1800 Series
Models: XL180, XL181, XL182, XL183, XL185,
and XL190, XL191, XL192
S
G
1800 S
ERVICE
UIDE
ERIES
R
R
29
EMOVAL AND
EPLACEMENT