Compaq Presario,Presario 18XL191 User Manual page 92

Removing the Heatspreader
To remove the Heatspreader, complete the following steps:
1. Prepare the Notebook for disassembly
2. Remove the Palmrest cover with TouchPad
3. Remove the keyboard
4. Remove six screws from the Heatspreader and lift out of the chassis.
To replace the Heatspreader, reverse these procedures.
Note: If the thermal pads on the Heatspreader are missing or damaged, a new
Heatspreader should be installed.
Important: Before installing a new Heatspreader, remove the plastic covering from
the thermal pads.
Å
WARNING: To prevent damage, do not use excessive force when replacing the
screws.
P N M
RESARIO OTEBOOK AINTENANCE AND
Presario 1800 Series
Models: XL180, XL181, XL182, XL183, XL185,
and XL190, XL191, XL192
(pg 17).
S G 1800 S
ERVICE UIDE ERIES
(pg 11).
(pg 14).
R R 23
EMOVAL AND EPLACEMENT