Compaq Presario,Presario 18XL191 User Manual page 61

Models: XL180, XL181, XL182, XL183, XL184, XL185,
Problem
Backlight (brightness)
cannot be adjusted
with Fn+F7 or Fn+F8.
This display panel has
a continuous pattern
across it (e.g.,
"jailbars" pattern), has
a single color on it, or
has garbled graphics
across the entire
panel. This failure is
for patterns across the
entire panel (not just
on one section).
A single line, small
group of lines, or block
appears on the display
panel. This failure
occurs in only a
section of the display
panel.
Note: When you perform a "self-test" on an external VGA color or monochrome monitor, the
screen should be white. A narrow black border may also appear on the left and right sides of
the display. Either of these displays indicates that the monitor is working properly.
P N M
RESARIO OTEBOOK AINTENANCE AND
Presario 1800 Series
and XL190, XL191, XL192
Display (Continued)
Probable Cause
Improper display cable
connections.
Defective inverter board.
Defective display cable.
Defective system board.
Improper display cable
connections.
Defective display cable.
Defective inverter board.
Defective system board.
Defective display panel.
S G 1800 S
ERVICE UIDE ERIES
Solution(s)
1. Reseat the display cable to the
system board.
2. Replace the display
Replace the display assembly.
Replace the display assembly.
Replace the system board.
Reseat the display cable to the
following until the problem is
solved:
1. System board
2. Display assembly
Replace the display assembly.
Replace the display assembly.
Replace the system board.
Replace the display assembly.
T
assembly.
25
ROUBLESHOOTING