To Use The Tap To Click Function Of The Touchpad - HP Compaq NX9020 Startup Manual

To Use the Tap to Click Function of the
TouchPad
The Tap to Click function of your TouchPad is enabled by default.
To disable it, follow the instructions included here:
1. Select Start > Control Panel > Printers and Other Hardware >
Mouse. The Mouse Properties dialog box opens.
2. Select the Tapping tab.
3. In the left panel, clear the Tapping check box.
4. Select Apply > OK.
The Tap to Click function is now disabled.
Startup Guide
Basic Operation
2–5