Preparing The Computer For Disassembly - HP Compaq NX6330 Maintenance And Service Manual

Notebook pc
Hide thumbs Also See for Compaq NX6330:
Table of Contents

Advertisement

Removal and Replacement Procedures
Disassembly Sequence Chart (Continued)
Section
Description
5.14
Internal Memory Module
5.15
Mini Card WLAN Module
Å
5.16
Display Assembly
5.17
Top Cover
5.18
PC Card Assembly
5.19
Modem Module
5.20
Speaker
5.21
USB Board
5.22
RTC Battery
5.23
System Board
5.3 Preparing the Computer for
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the computer. If you are unsure whether the
computer is off or in hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
5–4
To prevent an unresponsive system and the display of a
warning message, install only a Mini Card device
authorized for use in your computer by the governmental
agency that regulates wireless devices in your country. If
you install a device and then receive a warning message,
remove the device to restore computer functionality. Then
contact Customer Care.
# of Screws Removed
0
2
6
11
3
2
2
1
0
2 screws
2 screw locks
Maintenance and Service Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx6330 - notebook pc

Table of Contents