HP Compaq NX6330 Maintenance And Service Manual page 138

Removal and Replacement Procedures
5. If it is necessary to replace the Bluetooth module cable,
disconnect the cable 1 from the system board.
6. Remove the cable from the slot 2 in the base enclosure.
7. Remove the Bluetooth module cable 3.
✎
The Bluetooth module cable is included in the Bluetooth
Module spare part kit, spare part number 398393-001, and is
also available in the Cable Kit, spare part number 431318-001.
Removing the Bluetooth Module Cable
Reverse the above procedure to install the USB board.
5–52 Maintenance and Service Guide