Table of Contents
Advertisement
Available languages
Available languages
Please keep the instructions
safe for later use.
Explanation of symbols on the line trimmer
Denotes risk of personal
injury or damage to the tool.
Pictograms:
Wear safety glasses or goggles
when operating this appliance.
& Wear suitable ear protectors
when operating this appliance.
Do not work in the rain or leave
the trimmer outdoors whilst it is
Immediately remove the plug from
AC outlet if the cable is damaged
In accordance with essential
applicable safety standards of
European directives
Consult the manual.
This appliance is double insulated;
therefore no earth wire is required.
Always check that the power
supply corresponds to the voltage
on the rating plate.
WARNING: Packaging
materials are not toys!
Children must not play with
plastic bags! Danger of
ELECTRICAL SAFETY
Always check that the power
supply corresponds to the
voltage on the rating plate.
Items supplied
1 On/off switch, main handle
2 On/off switch, guide handle
3 Main handle "rotary"
4 Guide handle
5 Safety guard
6 Shears
7 Protective cover
raining.
or cut
suffocation!
Fitting the hand guard
Mount the supplied finger guard with the supplied
screws.
It is prohibited to use the
hedge trimmer without
Technical data
Voltage
Power consumption
Cutting length
Tooth spacing
Cuts/min
Protection class
Weight
Acoustic pressure level LpA EN 50144
72.3 dB(A)
Acoustic power level LwA
92.3 dB(A) K = 3 dB(A)
Guaranteed sound power
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
Weighted root mean square acceleration according
to relevant standard. :
Front handle
2.975 m / s ²
Rear handle
2.839 m / s ²
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration total
value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is
running idle in addition to the trigger time).
the hand guard.
230-240V ~ 50Hz
620 W
680 mm
24 mm
-1
1600 /min
3.9 kg
K = 3 dB(A)
EN 50144
LwA 96 dB(A)
ATTENTION !
must be worn.
K = 1.5 m / s ².
K = 1.5 m / s ²..
20
Advertisement
Table of Contents
