Table of Contents
Advertisement
How do you restore the system to its default settings?
• Press the Reset button at the rear panel of the wireless
router for more than five seconds.
• Refer to the section Restoring/Saving/Uploading settings
of this user manual.
The following are the factory default settings:
User name:
Password:
IP address:
SSID (2.4GHz):
SSID (5GHz):
Restoring the firmware via the Rescue mode.
If the firmware upgrade fails, do the Rescue mode process. Please
follow these steps:
1. Ensure that your computer has a static IP address such as
192.168.1.xx (xx can be any number between 2 and 254).
2. Turn off your DSL-AC88U. Hold the Reset button then power
on your device for five seconds. When the power LED blinks,
release the Reset button.
3. On your web browser, enter http://192.168.1.1. The interface
below appears.
46
admin
admin
router.asus.com
Refer to the label at the bottom of
the router
Refer to the label at the bottom of
the router
Advertisement
Table of Contents
