Asus 90IG0750-MO3B40 Quick Start Manual

Quick
Start Guide
ASUS ZenWiFi XD5
AX3000 Dual Band WiFi Router
Model: XD5
Before Setup
Preparing to set up an AiMesh WiFi system
Find two ZenWiFi XD5, and power them on.
1
Use a network cable to connect your modem to the WAN port of either ZenWiFi XD5. This ZenWiFi XD5 will
2
be the AiMesh router, and the other ZenWiFi XD5 will be the AiMesh node.
The LED turns solid blue to indicate that ZenWiFi XD5 is ready for setup.
3
ASUS Router App
Download free ASUS Router APP to set up and
manage your router(s).
AiMesh Setup Steps
01 Prepare
Place your ZenWiFi XD5 router and node within 3 meters of each oth-
er during the setup process.
02
AiMesh node
Keep your AiMesh node powered on and standby for AiMesh system
settings.
03 Launching ASUS Router APP
Launch ASUS Router APP, and then follow the on-screen instructions
to finish the AiMesh setup.
Troubleshooting
If your AiMesh router cannot find any AiMesh node nearby or synchronization fails,
please check the following and try again.
Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is within
a
3 meters.
Your AiMesh node is powered on.
b
Hardware Explanations
Plug the adapter into the DCIN port.
1
The power LED will light up when your hardware is ready.
2
XD5 Overview
LAN port
DCIN port
WAN/LAN port
Specifications:
DC Power adapter DC Output: +12V with max 1.5A current
Operating Temperature 0~40 o C Storage
Operating Humidity
50~90% Storage
AiMesh node
AiMesh Setup Steps
within
3 meters
AiMesh node
WAN/LAN port
Connect your modem to this port
with a network cable.
LAN port
Connect your PC to a LAN port with
a network cable.
0~70 o C
20~90%
AiMesh router
AiMesh router