How do you restore the system to its default settings?
• Press the Reset button at the rear panel of the wireless
router for more than five seconds.
• Refer to the section Restoring/Saving/Uploading settings
of this user manual.
The following are the factory default settings:
User name:
Password:
IP address:
SSID (2.4GHz):
SSID (5GHz):
Restoring the firmware via the Rescue mode.
If the firmware upgrade fails, do the Rescue mode process. Please
follow these steps:
1. Ensure that your computer has a static IP address such as
192.168.1.xx (xx can be any number between 2 and 254).
2. Turn off your DSL-AC3100. Hold the Reset button then power
on your device for five seconds. When the power LED blinks,
release the Reset button.
3. On your web browser, enter http://192.168.1.1. The interface
below appears.
46
admin
admin
router.asus.com
Refer to the label at the bottom of
the router
Refer to the label at the bottom of
the router