Table of Contents
Advertisement
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 48
When using the buttons on the remote control unit
1.
Turn on the ROOM 2 function.
2.
Select the desired input as a ROOM 2 source.
3.
Adjust the ROOM 2 volume.
4.
Mute the ROOM 2 sound.
5.
Start play on the component related to the ROOM 2 source.
All manuals and user guides at all-guides.com
48
• ROOM 2 ~ is displayed for several seconds.
• Each time the ROOM 2 button is pressed, the ROOM 2
mode changes as follows :
ON : To turn on the ROOM 2 function.
↕
("R2" lights up.)
OFF : To turn it off. ("R2" goes off)
■Note :
• When the ROOM 2 mode is set to OFF, the ROOM 2
volume cannot be selected.
• Each time the INPUT button on the universal remote
control is pressed, the ROOM 2 input can be selected
among MAIN source, TUNER, CD, F.AUX, TAPE, BT
(Bluetooth IN), VIDEO 1 ~ VIDEO 3.
• When the "VIDEO 4" button among the INPUT
SELECTOR buttons is pressed, "BT" will be selected.
• When the "AUX" button is pressed, "F.AUX" will be
selected.
• You can adjust the volume on the power amplifier
assigned to "Surr Back↔Room 2" or "Room 2". (For
details, refer to "When selecting the AMP Assign" on page
54.)
• To resume the previous sound level, press it again.
Advertisement
Table of Contents
