Changing A Usb Connection To A Wi-Fi Connection; Changing A Wi-Fi Connection To A Wired Network Connection - Epson WorkForce Pro WF-C5290 User Manual

Note: For more information on the Web Config utility, see the
1. Print a network status sheet.
2. Locate the IP address for your product that is listed on the network status sheet.
3. On a computer or other device connected to the same network as your product, open a web
browser.
4. Enter your product's IP address into the address bar.
You see the available Web Config utility options.
Parent topic:
Related tasks
Printing a Network Status Sheet

Changing a USB Connection to a Wi-Fi Connection

If you have already connected your product to your computer using a USB connection, you can change
to a Wi-Fi connection.
1. Disconnect the USB cable from your product.
2. Uninstall your product software.
3. Download and install your product software from the Epson website using the instructions on the
Start Here sheet.
Parent topic:
Related concepts
Uninstall Your Product Software
Related tasks
Disabling Wi-Fi Features

Changing a Wi-Fi Connection to a Wired Network Connection

If you have already connected your product to your computer wirelessly, you can change to a wired
network connection if necessary.
1. Disable your product's Wi-Fi features.
2. Connect one end of an Ethernet network cable to the product's LAN port.
3. Connect the other end to any available LAN port on your router or access point.
Changing or Updating Network Connections
Changing or Updating Network Connections
Administrator's
46
Guide.