Cleaning The Print Head Using The Product Control Panel - Epson WorkForce Pro WF-C5290 User Manual

Cleaning the Print Head Using the Product Control Panel

You can clean the print head using the control panel on your product.
1. Make sure there are no errors on the LCD screen.
2. Load a few sheets of plain paper in the product.
3. Press the
4. Select Maintenance > Print Head Cleaning.
You see a screen like this:
5. Select Start to clean the print head.
When the cleaning cycle is finished, you see a message on the screen.
Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
6. Select Check to print a nozzle check pattern and confirm that the print head is clean.
home button, if necessary.
184