Table of Contents
Advertisement
VIVOTEK
© 2020 VIVOTEK INC. All Right Reserved
NAME
transmission_mod
e
network_wire
network_wireless
network_dualmod
e
wireless_s802dot1
1b
wireless_s802dot1
1g
wireless_s802dot1
1n
wireless_begincha
nnel
wireless_endchann
el
wireless_encrypt_
wep
wireless_encrypt_
wpa
wireless_encrypt_
wpa2
wireless_apmode_
enable
278 - User's Manual
VALUE
Tx,
Rx,
Both
<boolean>
<boolean>
<boolean>
<boolean>
<boolean>
<boolean>
1 ~ 14
1 ~ 14
<boolean>
<boolean>
<boolean>
<boolean>
SECURITY
DESCRIPTION
(get/set)
tunnel for UART transfer.
0/7
Indicate transmission mode of the
machine: TX = server, Rx = receiver
box, Both = DVR.
0/7
Indicate whether to support Ethernet.
0/7
Indicate whether to support wireless.
0/7
Indicate whether network dual mode
is supported.
* Only available when
"capability_network_wireless" is "1".
* We support this parameter when
the version number (httpversion) is
equal or greater than 0305a.
0/7
Indicate whether to support wireless
802.11b+.
0/7
Indicate whether to support wireless
802.11g.
0/7
Indicate whether to support wireless
802.11n.
0/7
Indicate the begin channel of wireless
network
0/7
Indicate the end channel of wireless
network
0/7
Indicate whether to support wireless
WEP.
0/7
Indicate whether to support wireless
WPA.
0/7
Indicate whether to support wireless
WPA2.
0/7
Indicate whether wireless AP mode is
supported.
* Only available when
"capability_network_wireless" is "1".
* We support this parameter when
the version number (httpversion) is
147
Advertisement
Table of Contents
