Cancelling The Programme; End Of Programme; Energy Saving Mode - Beko WTV8633XB User Manual

4.3.12 Cancelling the programme

The programme is cancelled when the product is turned off and on again. Press and hold On / Off
button for 3 seconds.
C
If you press On / Off button when the Child Lock is enabled, the programme will not be cancelled. You should
cancel the Child Lock first.
If you want to open the loading door after you have cancelled the programme but it is not possible to open the
loading door since the water level in the product is above the loading door opening, then turn the Programme
Selection knob to Pump+Spin programme and discharge the water in the product.

4.3.13 End of programme

The "Complete" light (LED) will turn on when the programme is over.
If you do not press any button for 10 minutes, the product will turn off automatically. Display and all
indicators are turned off.
Completed programme steps will be displayed if you On / Off.

4.3.14 Energy saving mode

If no action is taken for 2 minutes after turning on the product with On / Off button or after
the chosen programme ends, the product will switch to energy saving mode automatically. The
brightness of the indicator lights will decrease. This display will be closed completely if programme
time display is available.
If you turn the programme knob or touch any button, the lights will switch back to previous position.
C
This is a feature of this product, and not an error.
Washing Machine / User's Manual
57 / EN