Starting The Programme; Loading Door Lock; Changing The Selections After Programme Has Started - Beko WTV8633XB User Manual

Adjusting the end time
If you want to cancel End Time function, press On / Off button to turn off and on the product.
C
Do not use liquid detergents when you activate End Time function! There is the risk of staining of the clothes.
C
You must press Start/Pause and wait for the door to open to add laundry into the machine during the End Time
countdown. Press Start/Pause once again after adding the laundry to resume the countdown. At the end of the
countdown, End Time indicator turns off, washing cycle starts and the time of the selected programme appears
on the display.
When the End Time selection is completed, the time appears on the screen is the total of the end time chosen
with the duration of the selected programme.

4.3.9 Starting the programme

1. Press Start / Pause button to start the programme.
2. Programme follow-up light showing the startup of the programme will turn on.
C
If no programme is started or no key is pressed within 10 minute during programme selection process, the product
will turn off automatically. Display and all indicators will turn off.
If you press on the On / Off button, the programme information set as default will be displayed.

4.3.10 Loading door lock

There is a locking system on the loading door of the product that prevents opening of the door in
cases when the water level is unsuitable.
"Door Locked" light in the panel turns on when the loading door is locked.

4.3.11 Changing the selections after programme has started

After the programme has started you can make the following changes.
Switching the product to pause mode
Press the Start/Pause button to switch the machine to pause mode while a programme is running.
The light of the step which the machine is in starts flashing in the Programme Follow-up indicator to
show that the machine has been switched to the pause mode. Also loading door light blinks until the
door is ready to be opened. When the loading door is ready to be opened Loading Door light will turn
off, programme step light will continue to flash.
Changing the auxiliary function, speed and temperature
Depending on the step the programme has reached, you can cancel or select the auxiliary functions.
See "Auxiliary function selection".
Also you can change temperature and cycle adjustments. See "Temperature selection" and "Spin
speed selection".
C
If no change is allowed, the relevant light will flash 3 times.
Adding or taking out laundry
1. Press the Start / Pause button to switch the product to pause mode. The programme follow-up
light of the relevant step during which the machine was switched into the pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out the laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions, temperature and speed settings if necessary.
6. Press Start / Pause to operate the product.
56 / EN
Washing Machine / User's Manual