Heat Sink - HP Compaq 2533t Maintenance And Service Manual
Mobile thin client
Hide thumbs
Also See for Compaq 2533t:
- Administrator's reference manual (112 pages) ,
- User reference manual (80 pages) ,
- Getting started (62 pages)
Table of Contents
Advertisement
Heat sink
Description
Heat sink (includes replacement thermal material and replacement thermal material cleaning kit) 481110-001
Before removing the heat sink, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Flash drive (see
b.
WLAN module (see
c.
Optical drive (see
d.
Switch cover and keyboard (see
e.
Display assembly (see
f.
Top cover (see
g.
System board (see
Remove the heat sink:
1.
Turn the system board upside down, with the front toward you.
2.
Following the 1, 2, 3, 4 sequence stamped into the heat sink, loosen the four Torx8 T8M2.0×10.0
screws (1) that secure the heat sink to the system board.
Battery on page
30).
Flash drive on page
36)
WLAN module on page
Optical drive on page
Switch cover and keyboard on page
Display assembly on page
Top cover on page
52)
System board on page
34)
38)
47)
57)
Component replacement procedures
Spare part number
40)
63
Advertisement
Table of Contents
