Whirlpool AMAP050BW Use And Care Manual page 8

Attach Side Curtains to Window
The steps for installing the side curtains are the same for
both sides.
1.
Extend side curtains
Extend side curtains out until they fit into the window channels.
2.
Secure side curtains to windowsill
Place the frame lock between the extended side curtain and the
window sill. Screw a ¾" locking screw through the frame lock and
into the window sill.
3.
Install screws into window sash
Use a ⁄ " drill bit to drill a starter hole through the holes in the top
1
8
rail and the top corners of the side curtains into the window sash.
Secure with three ½" screws through the holes in the top rail and
side curtain and into the window sash.
8
Complete Installation
1.
Install foam seal
A
A. Top of lower
window sash
B. Foam seal
Insert the foam seal without adhesive strip between the top of the
lower window sash and the glass of the upper window.
Remove any remaining clear plastic film from the control panel
and plastic front panel.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
�re, or electrical shock.
2.
Plug into grounded 3 prong outlet
Plug into a grounded 3 prong outlet
Press RESET on the power supply cord. See "Electrical
Requirements."
B