Specific Errata; Integrating Nic Drivers; General Process - Compaq Armada 110 Deployment Manual

Compaq Guide to PC Deployment
For example, change:
[SourceDiskNames]
1 = %LT.disk%, , 0001
to
[SourceDiskNames]
1 = %LT.disk%,,,c:\windows\system\precopy
4. Copy the driver's installation INF (named in the Errata) from the driver's directory to N:\WIN9
5. The video driver is now integrated into the Windows 95 installation share.

Specific Errata

C & T Video
Currently C&T Video isn't supported for MSBatch Installation.
ATI
Use MACXW4.INF as the installation INF.
S3 Video
Use S3VMX.INF as the installation INF.

Integrating NIC Drivers

General Process

1. Download each required SoftPAQ to its own directory (under the N:\WIN95 directory) named for the
contents (ex: N:\WIN95\ATI\ for the ATI Technologies video drivers) and execute the SoftPAQ. This
will lay out the files in a directory structure specified by the SoftPAQ.
2. If there are DISKx subdirectories move the contents down one level. For Example ATI\DISK1 would
move to ATI\.
3. Edit the [SourceDisksFiles] section in the driver's installation INF (named in the Errata) to add the
subdirectory name to all of the files listed. For example, for DIAMOND change:
For example, change:
[SourceDiskNames]
1 = %LT.disk%, , 0001
to
[SourceDiskNames]
1 = %LT.disk%,,,c:\windows\system\precopy
4. Copy the driver's installation INF (named in the Errata) from the driver's directory to N:\WIN95.
PRT/007A/0699
6
Preliminary