Table of Contents
Advertisement
Universal Touchscreen Learning Remote
Congratulations on your purchase of the RCU900RF by
RCA. The RCU900RF is one of the most sophisticated, yet easy
to use, remote control units available today. With the RCU900RF,
juggling multiple remote controls is a thing of the past!
Your RCU900RF controls up to eight devices, including the most
popular brands of TV, VCR, DVD, SAT/CBL, CD and
audio equipment. The RCU900RF has the ability to learn
commands from your existing remotes, and the Smart Macro
feature allows multiple commands to be executed with a single
keypress. The RCU900RF is easy to use, easy to program, and it
gives you total control—at the touch of your fingertips!
Battery Information
Your RCU900RF Universal Learning Remote with Touchscreen
requires four AA alkaline batteries (sold separately).
Battery Installation
To install the batteries:
1. Turn the to the bottom side, pull on the tab and lift off
the cover.
2. Insert the batteries, matching the batteries to the (+) and (-)
marks inside the battery compartment.
3. Slide the battery cover back into place.
Battery Saver
Your RCU900RF saves battery power by automatically turning off
if any button is pressed for more than 30 seconds. This saves
your batteries should your remote get stuck in a place where the
buttons remain depressed, such as under a book or between the
sofa cushions.
Code Saver
With the RCU900RF, you don't have to worry about losing
programmed information when you change batteries.
All programmed parameters are retained indefinitely in
the event of battery replacement.
Power-on Default
When you replace batteries, your RCU900RF remote always
powers on in the TV Mode. If your TV, VCR and satellite
receiver are RCA, ProScan or GE brands, you may not even need
to set up the RCU900RF to control them. In these instances, the
remote should work as soon as the batteries are installed.
3
Advertisement
Table of Contents
