Table of Contents
Advertisement
3. Press and hold the LCD LEARN key until the Main Setup
Screen is displayed. This process takes approximately
5 seconds.
4. All Learned command entries are now cleared for all
device modes.
Smart Macro Key Operations
Your RCU900RF's Smart Macro feature allows you to execute a
sequence of commands with one keypress. A Smart Macro learns
any sequence of original remote commands. A total of 20 learned
commands can be stored under each of the nine available LCD
MACRO keys. The sequence of commands you want a Smart
Macro to execute must be programmed in correct sequential
order. Any sequence of commands that you regularly perform
can be stored as a Smart Macro and reduced to a single
keypress. You cannot program a Macro within a Macro.
Program a Smart Macro
Example of Programming a Macro
1. Turn on the TV and set it to channel 3.
2. Turn on the satellite receiver and set it to channel 57.
3. Turn on the VCR.
4. Now you're ready to record your favorite satellite program
with just a press of a button.
To program a Smart Macro, follow these steps:
1. Gather all your original remotes that
contain functions you would like to
add to a Smart Macro.
2. Place the first original remote in the
Learning position. Point the top of
the original remote at the base of the
RCU900RF so the IR LED on the
original remote is in line with the
RCU900RF Learning sensor, located at
the bottom of the remote.
3. Press and hold the SETUP key on
the rubber keypad until the LED
indicator light remains on and the
touchscreen shows the Main Setup
Screen. This process takes
approximately 2-3 seconds.
4. Release the SETUP key.
5. Press and release the LCD MACRO
key. The LED indicator light blinks
off once to indicate acceptance of
the keypress.
6. The touchscreen now shows the
Macro Setup Screen 1. Press and
release the digit key under which
you want to store the Smart Macro
(from 1-9). The LED indicator light
blinks off once to indicate acceptance
of the keypress.
7. The touchscreen now shows the
Macro Setup Screen 2. Press and
release the LCD LEARN KEY?.
The LED indicator light blinks off
once to indicate acceptance of
the keypress.
19
Advertisement
Table of Contents
