Introduction; Battery Information And Installation; Key Descriptions - RCA RCU404 User Manual

RCU404_US_IB_REVB 7/16/03
4 Component
Universal Remote
Congratulations on your purchase of the 4 component
universal remote by RCA. This universal remote controls
up to four electronic components and makes juggling remote
controls a thing of the past. You can program this RCA
universal remote to operate most models of most brands of
infrared, remote-controlled components manufactured after
1990. (See the enclosed Code List for a complete list of brands).
The 4 component universal remote is easy to use, easy to
program and gives you control at the touch of your fingertips.
The 4 component universal remote is already
Note:
programmed to operate most RCA, GE and PROSCAN
branded TVs, VCRs, DVD players and satellite receivers (DBS).
Just press the corresponding component key—VCR for a VCR;
DVD•AUX for a DVD player; TV for a television; DBS•CABLE
for a satellite receiver or a cable box.
Battery Installation
and Information
Your universal remote requires two AAA Alkaline batteries
(batteries may or may not be included, depending on model).
To install the batteries:
1. Remove the battery compartment cover.
2. Insert the batteries, matching the
batteries to the (+) and (–) marks
inside the battery compartment.
3. Press and push the battery cover
back into place.
Note:
required after batteries are replaced.

Key Descriptions

Component keys (DVD•AUX, DBS•CABLE,
VCR, TV): selects the component you
want the remote to operate.
For example, after you've programmed
the remote to operate your TV, you must
press the TV key first to put the remote in
TV Mode. While in TV Mode, the CHAN
keys change the channel on the TV, the
VOL keys adjust the TV's volume, etc.
Transport keys–REW (Rewind), PLAY, FF
(Fast Forward), PAUSE, STOP: operate
the same as your original VCR or DVD
remote control, although key labels may
vary (REVERSE, FORWARD).
15:34 Page 3
Reprogramming may be
3