RCA RCU900RF User Manual page 27

PUNCH-THROUGH
A Punch-through command has the ability to punch-through
from one device to another, (e.g., the TV volume can work while
the remote is in the VCR Mode).
SETUP KEY
The SETUP key on the rubber keypad is used to walk you
through the steps in setting up the remote. Setup is used for
Library Code Entry, Code Search, Code Identification and other
functions. During a Setup function, if no button is pressed for 60
seconds, the unit automatically exits from the Setup routine.
SLEEP KEY
The LCD SLEEP key allows you to turn your TV off
automatically at a predetermined time.
SLEEP TIMER
The Sleep Timer allows you to program your TV to turn off
after a period of time (from one to 99 minutes). The LCD
SLEEP key is used to set the Sleep Timer and is only available
in the main TV Mode.
SMART MACRO
The Smart Macro function, when programmed, causes a series
of events to occur in sequential order. Pressing the LCD
MACRO key activates a screen that allows you to select any of
your programmed Macros. An example of a Macro sequence
could be "Turn on the TV; then set it to channel 3; then turn on
the satellite receiver; then set it to Channel 57." You can
program and store nine Smart Macros, with each consisting of
up to 20 commands.
TRANSPORT KEYS
The transport keys are located on the rubber keypad. Transport
keys include the REVERSE, PLAY, FORWARD, RECORD,
STOP and PAUSE keys.
TV/VCR
The LCD TV/VCR key operates the TV/VCR function of
your VCR.
VOLUME AND CHANNEL KEYS
The VOLUME and CHANNEL keys (VOL + , VOL - , CH + ,
and CH - keys) on the rubber keypad increase and decrease
the volume level and channel numbers.
With some brands, these keys also navigate through
Note:
highlighted choices in Menu Mode.
27