Delete A Smart Macro; Sleep Timer; Method 1 (From Normal Operation) - RCA RCU900RF User Manual

Delete a Smart Macro

To delete a previously programmed Smart Macro, follow
these steps:
1. Press and hold the SETUP key on
the rubber keypad until the LED
indicator light remains on and the
touchscreen shows the Main
Setup Screen. This process takes
approximately 2-3 seconds.
2. Release the SETUP key.
3. Press and hold the LCD MACRO
key until Macro Setup Screen 7 is
shown. The LED indicator light blinks
to indicate acceptance of the keypress.
Release the LCD MACRO key. Only
the programmed Macro key numbers
will be shown.
4. Press and release the digit key for the
Macro you wish to delete. The LED
indicator light blinks off once to
indicate acceptance of the keypress.
5. The Macro deletion is complete and
the Main Setup Screen will be shown.
6. If you are in the process of deleting
a Smart Macro and you decide
not to delete it, you can abort the
deletion process by pressing the
LCD CLEAR key.

Sleep Timer

Love to go to sleep with the TV on in the background? With the
RCU900RF, you can program your TV to turn off after a period of
time (from one to 99 minutes). The LCD SLEEP key is used to
set the Sleep Timer and is only available in the main TV Mode.
The SLEEP key is not displayed for any mode other than TV.
The TV Off command is sent at the end of the time period to
turn the TV off. You can set the Sleep Timer in two ways.

Method 1 (From Normal Operation)

To set your Sleep Timer from normal operation, follow
these steps:
1. Press the TV device key on the rubber keypad.
2. Press the LCD SCREEN key to switch to the second TV
screen on the touchscreen, which shows the LCD SLEEP key.
3. Press and hold the LCD SLEEP key in TV Screen 2 until the
LED indicator light remains on and the touchscreen shows
the Sleep Setup Screen. This process takes approximately
2-3 seconds.
4. Press and release the numeric keys indicating the number of
minutes (01-99) you wish to set on the Sleep Timer. The LED
indicator light blinks off once to indicate acceptance of the
keypress and the screen returns to normal operation.
5. The Sleep Timer is now set.
6. When using the Sleep Timer feature, leave the remote
pointing towards the TV with an unobstructed path.
21