Chapter 3: Getting To Know The Wireless-B Broadband Router; The Back Panel; Figure 3-1: The Broadband Router's Back Panel - Cisco HGA5T-3 User Manual

Wireless-B Broadband Router

Chapter 3: Getting to Know the Wireless-B Broadband Router

The Back Panel

The Broadband Router's ports, where the cables are connected, are located on the back panel.

Figure 3-1: The Broadband Router's Back Panel

Reset Button There are two ways to reset the Broadband Router's factory defaults. Either press the Reset
Button, for approximately ten seconds, or restore the defaults from the Password tab in the
Web-based Utility.
Internet The Internet port is where you will connect your broadband Internet connection.
1, 2, 3, 4 These ports (1, 2, 3, 4) connect the Broadband Router to your networked PCs and other
Ethernet network devices.
Power The Power port is where you will connect the power adapter.
Chapter 3: Getting to Know the Wireless-B Broadband Router
The Back Panel
Important: Resetting the Broadband Router
will erase all of your settings (WEP Encryption,
Wireless and LAN settings, etc.) and replace
them with the factory defaults. Do not reset
the Broadband Router if you want to retain
these settings.
6