Table of Contents
Advertisement
Dual-Band Wireless A+G Broadband Router
Chapter 3: Getting to Know the Dual-Band Wireless A+G
Broadband Router
The Back Panel
The Router's ports and Reset button are located on the back panel of the Router.
RESET Button
There are two ways to reset the Router's factory defaults. Either press the RESET button, for
approximately five seconds, or restore the defaults from the Administration tab - Factory
Defaults in the Router's Web-based Utility.
Internet
The Internet port is where you will connect your broadband Internet connection.
1, 2, 3, 4
These ports (1, 2, 3, 4) connect the Router to your networked PCs and other Ethernet network
devices.
POWER
The POWER port is where you will connect the power adapter.
Chapter 3: Getting to Know the Dual-Band Wireless A+G Broadband Router
The Back Panel
Figure 3-1: The Router's Back Panel
IMPORTANT: If you reset the Router, all of
your settings, including Internet
connection, wireless, and security, will be
deleted and replaced with the factory
defaults. Do not reset the Router if you want
to retain these settings.
port: the connection point on a computer or networking
device used for plugging in cables or adapters.
broadband: an always-on, fast Internet connection.
6
Advertisement
Table of Contents
