Table of Contents
Advertisement
TROUBLESHOOTING GUIDE
The information below is designed to help identify and correct any faults and/or malfunctions which may occur during operation.
Some failures can be resolved by the user; others require specific technical skills or special abilities and therefore must only be
resolved by qualified personnel with certified experience gained in the specific field of intervention.
Warning – Caution
Safely stop the robot (see "Robot Safety Stop") in case it is necessary to check the robot, in order to avoid
danger of accidental blade starting.
Problem
Abnormal vibrations
The robot is very noisy
The work area is not
completely mowed.
TROUBLESHOOTING
Cause
Cutting blade damaged.
Cutting blade fouled (tapes, ropes,
plastic fragments, etc.).
The robot was started too close to
obstacles (less than 1 m. (40 ") away)
or in the presence of unexpected
obstacles (fallen branches, forgotten
objects, etc.).
Electric motor failure.
Too high grass.
Not enough work hours.
Cutting blade fouled with deposits and/
or residuals.
Cutting blade worn.
Work area is too big compared to the
actual capacity of the robot.
The batteries are about to end their life
cycle.
The batteries do not recharge
completely.
25
Remedies
Replace the blade with a new one (see "Blade
Replacement").
Stop the robot safely (see "Robot safety stop").
Warning – Caution
Use protective gloves to avoid the risk of
injury.
Remove the debris from the blade.
Stop the robot safely (see "Robot safety stop").
Remove the obstacles and restart the robot.
Have the motor repaired or replaced by the
nearest authorised service centre.
Increase the cutting height (see "Cutting height
adjustment").
Carry out a preliminary cutting of the area with a
normal lawnmower.
Start the robot every day.
Stop the robot safely (see "Robot safety stop").
Warning – Caution
Use protective gloves to avoid the risk of
injury.
Clean the cutting blade.
Replace the blade with original spare parts (see
"Blade Replacement").
Adjust the work area (see "Technical
Specifications").
Replace the batteries with original spare parts.
Recharge the batteries for at least 4 hours.
EN
User's manual
Advertisement
Table of Contents
