Slopes; Steep Slopes - AMBROGIO L60 User Manual

Check that all the areas of the lawn do not exceed the admissible slopes (see "Technical Specifications").
Areas with steeper slopes or that are incompatible with the correct functioning of the robot (see following points) cannot be
mowed. Steeper slopes must be delimited.
Important
The sensors of the robot can detect slopes greater than the robot can manage. The direction is reversed
in order to prevent the robot from tipping over or malfunctioning. In addition, as a further protection, it is
necessary to delimit the areas, which have slopes that cannot be managed. It is recommended to test the
robot when using for the first time on slopes that are at the limit of the specifications.
UPWARD SLOPE
+ 0-40%
Greater than 1 m. / 39,3 "
included between 0 and +40%
The robot can tackle height differences with a slope of up to 40% provided that they gradually slope down over a distance of
more than one metre.
The robot's safety system will interpret sudden changes in the slope (greater than 25%) as an anomaly and therefore, will
reverse the direction and bring the robot back to safety continuing to mow the lawn. Tree trunks which gradually rise from
the ground or stones positioned to mark the boundary of flower-strips which gently descend onto the grassy surface are also
interpreted as slope changes.
Important
Check the robot when using for the first time on slopes that are at the limit of the specifications.
UPWARD SLOPE
+ 0-25%
included between 0 and +25%
The robot can tackle height differences with slopes of up to 25% if they slope down suddenly.

SLOPES

OK
+ 40 %
40 cm
(15,74 ")
100 cm (39,3 ")

STEEP SLOPES

OK
+ 25 %
25 cm
(9,84 ")
100 cm (39,3 ")
13
- 0-40%
Greater than 1 m. / 39,3 "
included between 0 and -40%
- 40 %
40 cm
(15,74 ")
100 cm (39,3 ")
- 0-25%
included between 0 and -25%
- 25 %
25 cm
(9,84 ")
100 cm (39,3 ")
DOWNWARD SLOPE
OK
DOWNWARD SLOPE
OK
User's manual
EN