Table of Contents
Advertisement
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Install anti-tip bracket to floor or wall per installation
instructions.
Slide range back so rear range foot is engaged in the
slot of the anti-tip bracket.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed
and engaged.
Failure to follow these instructions can result in death
or serious burns to children and adults.
1. Remove the anti-tip bracket that is taped inside the upper
oven with the package containing literature.
2. Determine which mounting method to use: floor or wall. If
you have a stone or masonry floor, you can use the wall
mounting method.
6
Install Anti-Tip Bracket
3. Determine and mark edge of range in the cutout space. The
mounting bracket can be installed on either the left side or
right side of the cutout. Position mounting bracket in cutout
so that right (or left) edge of the bracket is
the marked edge of the range, as shown.
4. Drill two
holes of the determined mounting method. See the following
illustrations.
Floor Mounting
A. #12 x 1
B. Anti-tip bracket
5. Using a Phillips screwdriver, mount anti-tip bracket to the
wall or floor with the two #12 x 1
A
B
C
A. Anti-tip bracket
B. Mark edge of
range.
C.
/
" (2.4 cm)
15
16
/
" (3.0 mm) holes that correspond to the bracket
1
8
A
B
A
5
/
" screws
A. #12 x 1
8
B. Anti-tip bracket
/
" screws provided.
5
8
/
" (2.4 cm) from
15
16
Wall Mounting
B
5
/
" screws
8
Advertisement
Table of Contents
