Kenwood DNX7190DABS Instruction Manual page 75

4
Set each parameter as follows.
[Small Audio Text]
■
Change the text size for the source control
screen.
[ON] (Default): Change the text size smaller.
[OFF]: Cancel.
[Steering Remote Controller]
■
Sets the desired function in the steering
remote controller. (Contact your KENWOOD
dealer for details.)
[Beep] (Except DNX9190DABS)
■
Turn the key touch tone on or off.
Default is "ON".
[Beep Volume] (DNX9190DABS)
■
Set the sound volume of the key touch tone.
"0" (Off ) – "3" (Default) – "5"
[Widget SETUP]
■
Set up the widget displayed on the Home
screen. (P.27)
[Vehicle Adaptor Information]
■
(DNX9190DABS / DNX7190DABS /
DNX5190DABS) *
Displays the vehicle information.
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
[Beep for Parking distance control]
■
(DNX9190DABS / DNX7190DABS /
DNX5190DABS) *
Sets whether to generate a warning tone
when the onboard proximity sensor detects
a human or object.
Consult your KENWOOD dealer for details.
[Parking Distance Display]
■
(DNX9190DABS / DNX7190DABS /
DNX5190DABS) *
You can display information about obstacles
around the car.
[ON]: Always displays information.
[Dyn.] (Default): Displays information when
the sensor detects obstacles.
[OFF]: Cancels.
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
1
1
1
[Parking Distance Position]
■
(DNX9190DABS / DNX7190DABS /
DNX5190DABS) *
Select where information about obstacles is
displayed on the screen (left or right).
"Left"/"Right" (Default)
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
[Language Select Mode]
■
Selects the mode to select a language.
[Easy] (Default): Selects a language easily.
[Advanced]: Allows you to select languages
for respective items.*
[Language Select]
■
Select a language.
[Touch Panel Adjust]
■
(Except DNX9190DABS)
Adjust the sensing position of the touch
panel. (P.76)
[Time Format]
■
Select the time display format.
"12-Hour"/"24-Hour" (Default)
■ [Clock]
[NAV-SYNC ](Default): Synchronizes the clock
time with navigation GPS data.
[Manual]: Set the clock manually.
[Time Zone]
■
If you have selected [Manual] for Clock,
select the time zone.
[Clock Adjust]
■
If you select [Manual] for Clock, adjust the
date and time manually. (P.76)
*1 This setting is available when a
commercial adaptor is connected.
*2 If you select [Advanced] for Language
Select Mode, the following screen
appears.
Setup
1
2
English
75