Table of Contents
Advertisement
2 6 OPERATION
A dj usting th e O v en T emperature
Y our new oven may cook differently from the one
it replaced. U se your new oven for a few weeks to
become more familiar with it before changing the
temperature settings. If after familiarizing yourself with
the new oven, you still think that it is too hot or too
cold, you can adj ust the oven temperature yourself.
N O T E
To begin, either raise or lower the thermostat
1 5 ° F (8 ° C). Try the oven with the new setting. If
the oven still needs adj ustment, raise or lower the
thermostat again, using the first adj ustment as a
gauge. For ex a mple, if the adj ustment was too
much, raise or lower the thermostat 1 0 ° F (5 ° C).
If the adj ustment was not enough, raise or lower
the thermostat 20 ° F (1 2 ° C). Proceed in this way
until the oven is adj usted to your satisfaction.
1
Set the oven mode knob to the O ff position.
2
Press and hold Start T ime for three seconds
(LSE46 1 7 model only) or press Setting. Then
press Start T ime (LSE46 1 7 model only) or
Setting repeatedly until "
display.
3
To increase the temperature, press plus ( + ) until
the desired amount appears in the display.
To decrease the temperature, press minus ( - )
until the desired amount appears in the display.
4
Press Start to accept the change.
N O T E
• This adj ustment does not affect the broiling
or Self Clean temperatures. The adj ustment
is retained in memory after a power failure.
The oven temperature can be increased (+ ) or
decreased (-) as much as 35 ° F or 1 9 ° C.
• Once the temperature is increased or
decreased, the display shows the adj usted
temperature until it readj usts.
T urning th e Preh eat A larm Ligh t O n/ O ff
When the oven reaches its set-temperature, the
preheating alarm light flashes 5 times or until the
oven door is opened.
1
Press and hold Start T ime for three seconds
(LSE46 1 7 model only) or press Setting. Then
press Start T ime (LSE46 1 7 model only) or
Setting repeatedly until "
display.
2
Press plus( + ) or minus( - ) to turn the light on/ off.
3
Press Start to accept the change.
A dj usting th e O v en Beeper V olume
1
2
3
4
Selecting Fah renh eit or Celsius
Set the oven temperature display to show either
Fahrenheit (° F) or Celsius (° C) units. The oven
defaults to Fahrenheit unless changed by the user.
1
2
" appears in the
3
4
T urning th e Cooktop Beeper O n/ O ff
1
2
3
4
" appears in the
Set the oven mode knob to the O ff position.
Press and hold Start T ime for three seconds
(LSE46 1 7 model only) or press Setting. Then
press Start T ime (LSE46 1 7 model only) or
Setting repeatedly until "
display.
Press plus( + ) or minus( - ) to select the desired
volume.
Press Start to accept the change.
Set the oven mode knob to the O ff position.
Press and hold Start T ime for three seconds
(LSE46 1 7 model only) or press Setting. Then
press Start T ime (LSE46 1 7 model only) or
Setting repeatedly until "
display.
Press plus( + ) or minus( - ) to select
F(Fahrenheit) or C(Centigrade).
Press Start to accept the change.
Set the oven mode knob to the Off position
Press and hold Start T ime for three seconds
(LSE46 1 7 model only) or press Setting. Then
press Start T ime (LSE46 1 7 model only) or
Setting repeatedly until "
display.
Press plus( + ) or minus( - ) to turn the beep
on/ off.
Press Start to accept the change.
" appears in the
" appears in the
" appears in the
Advertisement
Table of Contents
