Table of Contents
Advertisement
24 OPERATION
NOTE
• If the remaining time is not in the display, recall
the remaining time by pressing Timer On/Off.
4
When the set time runs out,
display. The indicator tones sound every 15
seconds until Timer On/Off is pressed.
Canceling the Timer
1
Press Timer On/Off once.
Wi-Fi
The Wi-Fi button is used to connect the appliance
to a home Wi-Fi network.
1
Press Upper CLEAR/OFF and Lower CLEAR/
OFF.
2
Press and hold Timer On/Off for 3 seconds.
3
The power on chime sounds, SEt appears in
the display, and the Wi-Fi icon (
4
Connect the appliance to the Wi-Fi network
using the LG ThinQ smartphone app.
5
To disconnect the appliance from the
network, delete it from the connected
appliances in the app.
NOTE
• See the Smart Functions section in the owner's
manual for more details.
Settings (Hour Mode, Convection
Auto Conversion, Calibrating the
Oven Temperature, Preheat Alarm
Light, Beeper Volume, Fahrenheit
or Celsius)
Press and hold Start Time for 3 seconds. Then
press the Start Time key repeatedly to toggle
through and change oven settings.
shows in the
ENd
) blinks.
f
The Settings button allows you to:
• set the hour mode on the clock (12 or 24
hours)
• enable/disable convection auto conversion
• calibrate the oven temperature
• activate/deactivate the preheating alarm
light
• set the beeper volume
• switch the temperature scale between
Fahrenheit and Celsius
Setting the Hour Mode
The control is set to use a 12-hour clock. To set the
clock to 24-hour mode, follow the steps below.
1
Press and hold the Start Time button for 3
seconds.
2
Press 1 to toggle between a 12-hour and 24-
hour clock.
3
Press START to accept the change.
Setting Convection Auto Conversion
When Conv. Bake and Conv. Roast are selected,
Convection Auto Conversion automatically
converts the standard recipe temperature entered
to a convection temperature by subtracting 25 ℉ /
14 ℃. This auto converted temperature shows on
the display. For example, select Conv. Bake, enter
350 ℉, and 325 ℉ shows on the display after
preheat.
Convection Auto Conversion is enabled by default.
To change the setting, follow these instructions.
1
Press and hold the Start Time button for 3
seconds.
2
Press Start Time repeatedly until
appears in the display.
3
Press 1 to disable or enable auto conversion.
4
Press START to accept the change.
NOTE
• The convection cooking mode uses air
circulation to cook faster and more evenly than
Avto
Advertisement
Table of Contents
