Installation; Rigging - EuroLite LED TMH-51 User Manual

INSTALLATION

Rigging

WARNING! Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure
that the device is installed securely and cannot fall down. The installation must be carried out by
a specialist who is familiar with the hazards and the relevant regulations.
The device may be placed on the floor or fastened to a truss or similar rigging structure. The device must
never be fixed swinging freely in the room.
1 The rigging structure must support at least 10 times the weight of all fixtures to be installed on it.
2 Block access below the work area and work from a stable platform when installing the device.
3 Use rigging hardware that is compatible with the structure and capable of bearing the weight of the
device. Please refer to the "Accessories" section for a list of suitable rigging hardware and follow the
instructions mentioned at the bottom of the base. Screw one coupler via a M10 screw and self-locking
nut onto the Omega brackets. Insert the two quick-lock fasteners of the Omega brackets into the
respective holes on the bottom of the device. Tighten the quick-lock fasteners fully clockwise.
4 Secure the device with a safety bond or other secondary attachment. This secondary safety attachment
must be sufficiently dimensioned in accordance with the latest industrial safety regulations and
constructed in a way that no part of the installation can fall down if the main attachment fails. Lead the
safety bond through the Omega bracket of the device and over the trussing system etc. Insert the ends in
the quick link and tighten the fixation screw. Fasten the safety bond in such a way that, in the event of a
fall, the maximum drop distance of the device will not exceed 20 cm.
5 After installation, the device requires inspections periodically to prevent the possibility of rot, deformation
and looseness.
the structure (truss) to which you are attaching the fixtures is secure.
Use 2 appropriate couplers to rig the fixture on the truss.
Make sure that the device is fixed properly! Ensure that
CAUTION!
25/36 00110746, Version 1.2